5.5 Cabling

5 Electronics, DAQ, Power

5.5 Cabling

5.5.1 - From SMC to SHVC
5.5.2 - SHVC Cards
5.5.3 - From SHVC to PMT
5.5.4 - From PMT to SBBC
5.5.5 - SBBC Cards
5.5.6 - From SBBC to SFEC or SMC
5.5.7 - SFEC cards

The ATC group has an allocation of four SMC cards. These cards provide +12 V, the Vref and a part of the +5, -5 V needed for the SBBC cards. There are two AIRBORN connectors on each of the SMC cards. Each SHVC card requires one +12 V power and a reference, i.e. 4 pins. There are 22 SHVC cards requiring 88 pins. Part of each of the two SMC connectors will provide 12 V for SHVC. The remaining 96+8 pins will be allocated to provide +5, -5 V to the SBBC cards. Each connector will service 5 SBBC cards. Unfortunately, due to the fact that each of the SMC cards is allocated to more than one module we have to distribute power accordingly, which makes the cabling of the detector not straightforward. The connector is probably AIRBORN Male on the card with a 25 pin layout in two columns. The precise pin-out needs to be clarified.

Issue: Draft - Revision: 04 - Last Modified: 20 April 1997